• Reinhardt Energy

    September 20, 2021 // Comments Off on Reinhardt Energy

    A further focus is on innovative technologies and projects realised. Ideal carrier of the event are the Federal Ministry of transport, building and urban development (BMVBS), the Chamber of architects of Baden-Wurttemberg and the Institute training building (IFBau) of the Chamber of architects of Baden-Wurttemberg. Energy-efficient construction concepts require necessarily a convincing sensual presence!”Peter Reinhardt emphasized Eng.. Endera follows long-standing procedures to achieve this success. Who wants to know from an ugly building, it is sound?”asks provocatively Reinhardt. Here is the valuable task of architecture: beyond the technological requirements of an energy-efficient building concept, the architecture will give the sensual presence these buildings, they need to convince.

    The CEP also contributes, with its choice of subject in exhibition and above all the congresses in the field of construction and renovation. The Chamber of architects of Baden-Wurttemberg gladly participates in this discussion and working design environmental claim there is no contradiction between and more. This project uses some innovative concepts in motion now also in Germany. The perennial successful participation in Baden-Wuerttemberg universities, for example in the competition “Solar Decathlon”, shows that the design in the area of energy efficiency is always wider discussed and explored. The competition, held in Madrid, is a most important and most respected architectural competitions in the world. As one all over the World Congress partner of twenty universities from takes this year the HTWG Konstanz, the “2nd Symposium energy plus building” in the context of the CEP, at the Solar Decathlon Europe.

    Within the framework of the 5th CEP CLEAN ENERGY & PASSIVEHOUSE are all possibilities for new construction and energy-efficient building retrofits be it passive house solutions, energy plus building, presents the Sonnehaus, KfW-building or buildings. The trade fair area Passive house focuses on growing from year to year main exhibition of the CEP and provides comprehensive information about the leading standard for energy-efficient construction and renovation. The innovative conference topics the CEP 2012 determines an interesting Outlook into future developments. Focuses on what is already possible, but also which architects, planners, engineers and skilled craftsmen are involved in future not only will. “In the field of construction and renovation, the CEP are congresses such as the Congress of passive house in practice for the housing sector” in cooperation with Pro passive e.V., which deals with the acceptance, financing and economics of passive houses and completed projects from the housing industry, the 2nd Symposium energy plus building “in cooperation with the HTWG Konstanz or the Congress of energy-efficient renovation in inventory – window”, Facades, insulation” in cooperation with the Fraunhofer IRB particularly worth highlighting. Selected conferences the CEP can as Training event for architects in the internship (AiP) be approved. Sustainable building systems, solutions regarding the building or the building whether energy generation from renewable and decentralised energy sources or services in the field of energy the CEP CLEAN ENERGY & PASSIVEHOUSE shows the most innovative products and solutions. The fair takes place from 29-31 March 2012 at the Stuttgart Exhibition Centre. For more information,

    Posted in General

    The Assembly

    September 15, 2016 // Comments Off on The Assembly

    A specially developed cutting technology provides in connection with a multifunctional corner piece, which is geklipst under the circumferential seal for long term optimal positioning in the corner. The mounting of the glass rebate insulation specially in the corner areas to speed up and simplify, Schuco offers new fittings, which at the same time serve as a spacer for the glazing bridges. Eliminates a time consuming manual cut of the corner pieces. About additional cut-outs also simplifies the installation of glazing beads. With these two new SimplySmart technologies, you can save about 10 per cent of the total installation time of a window. Beschlagssytem Schuco AvanTec SimplySmart Schuco AvanTec SimplySmart stands for a new generation of mechanical, opening to the inside fittings, the timeless design and versatile functionality with Intelligent installation connects. As well as tool-free and flexible Assembly sequences established design features are included as hidden hardware components and leaf weights up to 250 kg for turning and 200 kg for Failproof outstanding criteria.

    Can you be covered mounted function elements such as pivot, scissors or closing role in the frame. This is made possible by a new clip technology, with which the hardware components can be used from outside directly in the Schuco profile Groove without open corners. In addition, the Endpunktgeometrien of the connection components have been changed. Tolerance zones make it easier so the connectivity of the bolt and compensate for possible cutting errors. In addition to the Assembly technology the Assembly order was made more flexible. The Assembly instructions are applicable with Schuco AvanTec SimplySmart: first all functional components such as pivot or pair of scissors, then the bolt, followed by the locking components. The starting point is flexibly selectable. The resolution of the rigid order facilitates the processing and reduces the complexity of the hardware installation. For more information, aws-simplysmart

    Posted in General