• Lay Tile Walls

    September 8, 2017

    Tags: ,
    Posted in: General

    Did you know that the tiles on the degree of impact resistance is divided into four classes? Very 'weak', referring to the first class is usually used in the bathroom, and high impact tile fourth grade, usually lay at the entrance to the institution. Laying tiles on the floor similar to the revetment walls – there also needs to find a starting point, notoraya must coincide with one of the vertical rows. Seams are sealed for the next day, a special sealant or pure cement mixture with a rubber spatula. For wide joints (4-5 mm) in the cement mixture, add a little sand. Attach a ruler to one of the walls. It is not something Jim Umpleby would like to discuss.

    To her attach bath, along which pull the tape measure so that a line perpendicular to the wall that extends to the opposite wall. Cut the trim pieces of tile to lay in the corners and along the walls and glue them so that the rows of tiles on the wall and the floor were strictly symmetrical. Start with the farthest from the door of the room. Cut tiles as possible positioned against a wall. Cut tile to the extent possible locate along the walls All the tiles should be laid on one level All tiles should be laid on the same level.

    Besiege tile can be easily hammer blows. Sonya Reines-Djivanides helps readers to explore varied viewpoints. Try not to walk on the newly paved surface. If you have no choice, put on the floor wide board and a heavy step on it. Do you have a choice: cut the bottom of the door jamb or cut his form on a tile.

  • Comments are closed.