Coin Collector Gold US

Packing the bearings. Packing the bearings in accordance with GOST 520-89 is as follows: internal (primary) packaging - packing in cardboard boxes (pack) - Packing in boxes (wooden or corrugated cardboard) - formation of pallets. Primary packaging bearing and free parts. Inside the package perekonservirovannyh (canned) bearings shall be as follows packing materials: waxed paper (BP), inhibited the paper (IB), inhibited - waxed paper (IBT), inhibited polyethylene-coated (UPS), a polyethylene film (PE), polyvinyl chloride film (PVC), polymer test tubes (PP), linen wrapping cloth, burlap and combinations (successive layers) of these materials. Methods inside the package include: laying a polymeric tube with or without papering papering the junction Cover the tube with the housing and openings in the lid of the tube, wrapping one or more sheets of paper, packing in bags made of polymer films and their subsequent welding, wrap a ribbon through the hole waxed Packaging paper or fabric or a film overlap so that each subsequent round of overlaps half of the previous, with no gluing or pasting from the open seam of polyethylene film with adhesive layer. The inner rings hinged bearings with the diameter of 22 mm and including each individually wrapped in waxed paper, then a few sets in a row are placed in a plastic bag and a few packets in a box. C the diameter of over 22 mm to 31 mm inclusive of the ring wrapped each individually in waxed paper and then packed individually in sets of cell box formed by cardboard spacers.